Specifications:
1) 10 gauge steel wire woven into 1-1/2" diamond mesh, securely attached to framing
2) Vertical frame: 1-1/4 x 5/8" cold rolled 'C' steel channels with 1/4" bolt holes
3) Horizontal frame: 1 x 1/2" cold rolled steel channels
4) All joints are mortised and tenoned
5) Center reinforcing bar: two cold rolled steel channels 1 x 3/8" riveted through wire
mesh at 3'6" from floor, additional bar required for 12' high partition
6) Top capping bar: 1-1/2 x 1" cold rolled steel channel, with 1/4" bolts 30" O.C.
7) Corner posts: 1-1/2 x 1-1/4" steel angles with 1/4" bolt holes
8) Floor sockets: cast aluminum
9) Door frame: 1-1/4 x 1/2" cold rolled steel channel
10) Sliding doors have two four-wheel roller bearing truck/hangers enclosed in a
galvanized steel box track and one steel channel bottom guide
11) Hinge doors have 1-1/2 pairs of butt hinges bolted to door and transom frame
12) Locking clasps arranged for padlocking or cylinder mortise lock outside with
recessed knob inside available
13) All partitions have 3" sweep space and include hardware and accessories for
proper installation, specify partition to wall connection hardware separately
14) Surface finish: one shop coat gray powder coated